30×10 ft. Modco 16 Modular Display – Graphic Package

Includes:

• SEG Dye Sub Fabric Graphics w/ integrated blockout
• (27) 992×2418 Frames
• (3) Door w/ lockset
• (4) T Connector
• (2) Door Jamb Pin Connectors
• (10) Door Jamb 180° Barrel Connectors
• (36) 180° Barrel Connectors
• (8) 90° Top/Bottom Connectors
• (8) 90° Middle Connectors
• (18) Clip Connectors
• (120) Pin Connectors
• (120) Frame Protectors
• (4) Cover Profiles
• (2) Heavy Duty Crates

• Display Size: 351″W x 95.25″H x 97.5″D
• Graphic Size: 
• 34.25″W x 93.375″H
• 117.125″W x 95.25″H
• 78.25″W x 95.25″H

How the Modco 16 Layout Uses 30 Feet of Inline Space

A 30-foot inline is a significant investment of floor space, and it deserves a display architecture that fills it intentionally rather than simply stretching one graphic wall across the run. The 30×10 modco 16 modular display uses its panel count and arrangement to create visual rhythm — distinct panel zones that naturally guide visitor attention from one end of the booth to the other. That rhythm is built into the configuration itself, meaning you are not relying entirely on graphic design to establish depth in what would otherwise be a flat backdrop.

Because individual panels are independently printed, you can assign different graphic content to different zones without breaking the overall visual continuity of the display. A product-feature section on the left, a brand identity wall in the center, and a call-to-action zone on the right — the Modco 16 supports that kind of intentional layout without custom fabrication. When your message changes for a new show season, you replace only the panels that need updating rather than reprinting the entire structure.

Comparing the Modco 16 Against Two Common Alternatives

Buyers deciding between a rigid modular system and fabric-based alternatives often focus on three factors: print clarity, setup time, and long-term cost of ownership. The table below provides a direct comparison between the 30×10 modco 16 modular display and two alternatives commonly evaluated alongside it.

The per-panel replacement model is one of the most practical cost advantages of the modco hard panel display format. When a competitor’s show schedule changes and you need messaging updated for one zone of a 30-foot wall, reprinting two panels is considerably less expensive than reprinting an entire fabric graphic. For exhibitors who show more than four or five times per year, that savings compounds quickly.

If you are still deciding which system architecture fits your program, the modular display buying guide covers the full decision framework — including when rigid panels outperform fabric and when the reverse is true.

Where This Display Configuration Performs Best

The 30×10 modco 16 modular display is genuinely well-matched to mid-size trade shows, industry conferences, and regional roadshows where a brand needs a credible, substantial presence without the logistics overhead of a custom-built island exhibit. The 30-foot width creates enough floor depth to support a product demonstration area in front of the display without the booth feeling crowded.

This configuration also suits exhibitors who travel to multiple venues across a show season. Because the hard panels are rigid rather than fabric-wrapped, they resist the cumulative wear that repeated packing and unpacking inflicts on stretched-textile systems. The modco panel display format is specifically designed for repeated deployment — the connection system holds tolerance across many assembly and disassembly cycles.

Brands that need product storage or structured display surfaces mid-booth should know that the Modco system supports accessories including shelving. A custom modco display configured with integrated shelves allows product samples, literature, or devices to sit at standing height within the booth footprint without adding freestanding furniture. For a deeper look at the full accessory range and all available configurations, the modco hard panel display collection page lists every kit.

If your show calendar also includes smaller 10×10 or 10×20 footprints, it is worth noting that the same panel system scales — so you can carry a smaller configuration of the same display to regional events without buying an entirely separate system. Exhibitors who occasionally need a lightweight alternative for portable solo events sometimes pair a Modco with a Qseg modular display for those smaller footprints, keeping the two systems purpose-assigned by show type.

The broader modular trade show displays catalog at Showfire Displays includes additional 30-foot configurations if the Modco 16 panel layout does not match your floor plan. For exhibitors who want a lighter-weight tube-frame alternative rather than hard panels, the EZ Connect modular system offers a different structural approach worth reviewing before you finalize your order.

Configure and Order Your 30×10 Modco 16 Modular Display

The 30×10 modco 16 modular display is built for brands that treat their booth as a long-term asset — not a one-show expense. Rigid panels hold your graphics flat, your configuration stays consistent from event to event, and the system’s modco with shelves compatibility means you can add product display depth without sourcing third-party furniture. The panel modular display format is a proven choice for sustained, multi-show programs where reliability and print quality are non-negotiable.

Ready to move forward? Configure your graphic package, upload your artwork, and place your order directly through Showfire Displays. The team is available to assist with file requirements, configuration questions, and shipping logistics — so you can get your display built and on the floor without the back-and-forth that usually slows a custom display order.