20×10 ft. Modco 3 Modular Display – Graphic Package

Includes:

• SEG Dye Sub Fabric Graphics w/ integrated blockout
• (2) 992×2418 Frames
• (3) 992×1984 Frames
• (10) 310×1984 Frames
• (4) 310×992 Frames
• (4) 992×992 Frames
• (24) 90° Middle Connectors
• (28) 90° Top/Bottom Connectors
• (154) Pin Connectors
• (40) Clip Connectors
• (13) Cover Profiles
• (76) Frame Protectors
• (9) Shelves
• (2) Countertops

• Display Size: 229″W x 95″H x 51″D
• Graphic Size:
• 39.125″W x 95.25″H
• 39.125″W x 78.125″H
• 12.25″W x 78.125″H
• 39.125″W x 39.125″H
• 12.25″W x 39.125″H

A Day in the Life of the Modco 3 Configuration

The crates arrive at the convention center dock the morning before the show opens. Two people pull the panel sections from the shipping containers, and within roughly 90 minutes the 20×10 modco 3 modular display is standing, level, and ready for accessories. There is no guesswork with the connectors — each joint clicks into a single correct position, which means your booth does not list to one side or require shimming on the show floor.

By midday your graphics are under show lighting, and the difference between a modco hard panel display and a fabric pop-up becomes immediately obvious. The hard panels do not catch air from the HVAC system or develop soft spots where the print has stretched. The surface remains taut, flat, and consistent across the entire 20-foot run.

When the show closes, breakdown is the reverse of setup. Panels nest flat into the provided cases, graphics are protected behind the structure, and the monitor mount folds down without tools. The cases roll to the dock and the display is ready for the next city.

What the Graphic Package Includes

• Full-panel dye-sublimated graphics printed to fit each hard aluminum panel face, with no visible seams across the primary viewing area
• Integrated monitor mount bracket pre-positioned for a standard flat-panel screen, accommodating displays from 32″ to 55″ in most configurations
• Connector hardware and assembly tools included so no separate tool purchase is required at installation
• Protective wheeled shipping cases sized for airline freight or ground transport, with foam-lined interiors
• Printed setup instructions with panel-by-panel diagrams keyed to the specific Modco 3 layout

Choosing the Right Graphic Configuration for Your Booth

The 20×10 modco 3 modular display is configured for exhibitors who need a strong visual backdrop paired with active engagement space in front of it. The layout keeps the rear wall tall and graphic-heavy while the open floor plan in front accommodates tables, pedestals, or a modco with shelves accessory if your product line needs physical display surfaces.

If your show roster includes events where you need a smaller footprint, the modco modular kit system is designed so that individual panels from this 20-foot configuration can be recombined into a 10×10 build without purchasing an entirely separate display. That built-in scalability is one of the primary reasons exhibitors choose hard-panel modular systems over pop-up alternatives — the investment spans multiple configurations rather than a single rigid size.

For teams evaluating the full range of modular systems before deciding, the modular display buying guide walks through the structural, graphic, and logistical differences between fabric, hard-panel, and hybrid builds in detail. It is worth reading before finalizing a configuration, especially if your show schedule mixes large-format events with smaller regional dates.

If your priority is an even lighter pack weight for frequent air shipping, the Qseg modular display uses a fabric SEG panel system that compresses smaller — though it does not offer the same rigid surface consistency as the Modco 3 hard-panel construction. Alternatively, exhibitors whose booths rely heavily on monitor integration sometimes prefer the EZ Connect modular framework, which uses a tube-and-connector chassis that accommodates multiple screen positions across a single inline run.

The broader modular trade show display catalog on Showfire covers all of these systems side by side, with dimensions, weight specs, and graphic options listed per configuration, which simplifies direct comparison before you place an order.

Configuring and Ordering Your 20×10 Modco 3 Modular Display

The custom modco display process at Showfire starts with your artwork files. The team provides panel-specific templates so your designer knows exactly where bleeds, safe zones, and seam alignments fall for the Modco 3 layout — no guessing, no reprints from misread specs.

Production lead times and shipping details are available directly on the product page, and the Showfire team can answer configuration questions about monitor size compatibility or accessory additions before your order is confirmed.

This is a capable, durable 20×10 modco 3 modular display built for exhibitors who show up more than once a year and need their booth to perform consistently every single time. Get your artwork templates, submit your files, and put a hard-panel booth on the floor that earns its space at every event — order yours today.