7.5 ft x 7.5 ft Lumiere Backlit Light Wall Kit – Double-Sided

Lumiere Light Wall 7.5 ft. x 7.5 ft. Frontlit Double-Sided Graphic Package Includes:

• (1) Pop Up Frame
• (8) 3-Section Channel Bars
• (1) Channel Bar Bag
• (1) Carry Bag (for frame)
• (9) Ladder Light Sets
• (3) Travel Bag for Ladder Lights
• (3) Transformers
• (3) Transformer Power Cord
• (2) 7.5ft x 7.5ft backlit graphics
• (2) End Caps (either block out or printed)

Display Dimensions: 88.75 ” W x 88.75″ H x 14.5″ D
Graphic Dimensions: 88″ W x 88″ H
Frame Shipping Weight: 36 lbs (including graphics)
Frame Shipping Dimensions: 34″ L x 14″ W x 9″ H
Ladder Light Shipping Weight: 24 lbs
Ladder Light Shipping Dims: 7.5” L x 5.5” W x 30.5” H

The Display Challenge This Format Is Designed to Solve

Picture a 10ft x 10ft island booth at a mid-size trade show. You have traffic moving down two aisles — one on each side of the structure. A single-sided back wall grabs one audience and ignores the other. You can fill the open face with a banner stand or a second panel, but then you are managing two separate structures, two power runs, and two graphic systems that may not even match in brightness or color accuracy.

That is the problem a 7.5ft x 7.5ft double sided seg backlit display is built to resolve. One frame, one power connection, two fully lit graphic faces — both showing with identical luminosity so neither side looks like an afterthought.

How the Lumiere Frame Delivers on Both Sides

The Lumiere system starts with a lightweight aluminum extrusion profile that connects at push-button joints. No tools, no loose hardware to track across a convention center floor. The frame is rigid once assembled, with enough structural depth to house the LED light bars on both faces without adding bulk visible from the aisle.

SEG fabric graphics are printed on high-resolution dye-sublimation fabric with a silicone bead bonded to the perimeter. That bead tucks into a recessed channel on the frame, pulling the print flat and taut with no wrinkles and no visible mounting hardware. Because the graphic and the frame are independent components, replacing a worn or outdated print is a straightforward task — order new fabric, pop out the old bead, and press the new one in place.

The integrated LED modules run cool, draw modest power from a standard outlet, and produce consistent illumination edge to edge. Brightness is calibrated so both faces read at the same intensity, which matters in a double-sided format where uneven lighting would undercut the investment on the dimmer side.

For a broader look at how SEG backlit formats compare by size, orientation, and use case, the SEG backlit display guide covers the full decision framework in detail.

Good to Know: Graphic File Requirements

Submit print-ready artwork at the correct bleed dimensions — Showfire Displays provides a template at the time of order. RGB color mode produces the most accurate results on dye-sub fabric. Allow for the silicone-bead seam in your composition so no critical text sits too close to the edge.

Good to Know: Power and Placement

The display requires one standard 110V outlet. In double-sided configurations, both faces run off a single power connection routed internally through the frame — no visible cord runs along the outside of the profile.

Good to Know: Pack and Transport

The frame breaks down into manageable sections and ships with a carry bag or case. Graphic panels fold flat without permanent creasing when handled properly. The overall pack size is manageable for checked freight or a trade show shipping pallet.

Fitting This Configuration Into a Larger Display Strategy

The 7.5ft x 7.5ft square format is one of several footprints in the lumiere backlit display line. If your booth layout calls for a narrower accent panel alongside a primary back wall, the 5ft x 7.5ft lumiere backlit display shares the same frame system and graphic attachment method, making it easy to combine with this unit for a coordinated multi-panel setup.

For very tight column positions or end-cap accents where space is at a premium, the 2.5ft x 7.5ft SEG backlit display provides a slim, illuminated presence that fits where wider panels cannot. Mixing widths across a single booth lets you address multiple audience sightlines without committing to a custom structure.

If you are weighing options across the broader tension fabric light box lineup, comparing mounting styles, single vs. double sided formats, and size-to-booth-footprint ratios before committing is a smart move — the single vs double sided backlit display section of the pillar guide walks through exactly those trade-offs.

Order Your Lumiere 7.5ft x 7.5ft Backlit Wall Today

The 7.5ft x 7.5ft double sided seg backlit display is one of the most versatile formats in the Lumiere line — adaptable to island booths, peninsula setups, and any configuration where two attendee-facing sides matter as much as one. Custom graphic printing, a reusable aluminum frame, and tool-free assembly mean you get a professional lit backdrop without the complexity of a custom fabrication. Place your order with Showfire Displays now and get this display into your next show schedule.