20 ft Square Hanging Banner Kit – 32 in. Drop

This particular model is 20ft in diameter and 32″ tall.
Graphic is included in price.

(1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
(1) Full color zippered tension fabric graphic print (Outside print)
Nylon travel bag
Hanging Cable
Also includes: chain, spring, eye hook, large screw, hook loop lock, screw tightener

Graphic Material
Fabric

Graphic Finishing
Hem with zipper

Construction
All aluminum frame construction

Warranty
1 Year on Graphic
1 Year on Frame

Who the 20 ft x 32 in Square Hanging Banner Is Built For

This configuration is a strong fit for exhibitors working with 20 x 20 island booths who want overhead signage that does not dominate the visual field — just anchors it. The 32-inch drop profile works especially well when venue rigging height is limited to 20 or 22 feet, leaving comfortable clearance between the sign and the floor traffic below.

Corporate event teams running recurring conferences also benefit here. Because the frame stores flat and the fabric pillowcase slips off the frame for separate washing or replacement, the same hardware investment carries fresh artwork from show to show without any structural replacement cost.

Retailers setting up temporary shop-in-shop displays inside larger retail halls have used this format to define their footprint from the ceiling down. A 20-foot-wide square sign at 32 inches of drop creates a clear visual boundary overhead that guides shopper attention to the right zone without blocking sightlines across the floor.

What Comes in the Kit — Core Specs Worth Knowing

The aluminum frame assembles without tools, breaking down into short segments that pack into a carry bag alongside the fabric graphic. The dye-sublimation process bonds ink directly into the polyester fibers rather than sitting on top, which means the color resists fading and cracking through repeated pack-and-unpack cycles.

Key features to note:

• Full-color dye-sublimation print — rich, fade-resistant output across the entire panel
• Lightweight aluminum frame — quick assembly, no tools required
• Stretch-fit pillowcase graphic — taut, wrinkle-free finish once installed
• Complete rigging hardware included — cables, carabiners, and adjusters in the kit
• Replaceable graphic panels — swap artwork without buying new hardware

Configuring Your 20 ft x 32 in Square Hanging Banner for the Venue

Before placing your order, confirm two things with your show services contractor: approved rigging points directly above your booth, and the finished height from floor to the bottom of the sign after rigging. A 20 ft x 32 in square hanging banner suspended at 18 feet puts its lower edge at roughly 15.3 feet — comfortable for traffic flow and well within standard exhibit hall minimums.

When your artwork file arrives at the printer, the 32-inch outside graphic dimension means your usable print area is slightly inset from the outer edge to account for the frame channel. Work with your designer to keep critical copy and logos within the safe zone specified in the template your order confirmation will include.

For storage between shows, the fabric panel can be machine-washed on a gentle cycle and air-dried — an easy refresh that extends the life of the graphic before a reprint becomes necessary. The aluminum frame segments should be wiped down and stored in the bag they shipped in to prevent surface scratching.

How This Drop Fits the Full 20 ft Square Format Range

The 32-inch drop sits at the shallower end of the available drop options for the 20-foot square format. Exhibitors who need more graphic height — for product photography, multi-line copy, or a deeper brand block — can explore configurations with 48-, 60-, or 72-inch drops within the custom 20ft square hanging banner product family.

If your program includes smaller booth footprints at regional shows, the 8ft square hanging banner is worth reviewing as a complementary size that uses the same format language at a fraction of the footprint. For even more compact applications — demo stations, kiosk areas, or double-stacked displays — the 5ft square hanging banner handles those scaled-down needs without requiring a separate hardware system.

The full square hanging banner for island booth collection covers widths from 5 feet through 20 feet across multiple drop depths, so you can match hardware and fabric to every booth size in your event calendar. Buying within the same format family means your team builds familiarity with one assembly system across every show.

Configure and Order Your Sign

Ready to move forward? Upload your artwork, select single- or double-sided printing, and complete your order directly on the 20ft square hanging banner with hardware product page. Production and shipping timelines are shown at checkout — confirm your show date before finalizing to make sure your sign arrives with time for a test assembly run.