This particular model is 5ft in diameter and 32 inches tall.
Graphic is included in price.
• (1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
• (1) Full color zippered tension fabric graphic print
• Nylon travel bag
• Hanging Cable
• Also includes: chain, spring, eye hook, large screw, hook loop lock, screw tightener
Graphic Material
Fabric
Graphic Finishing
Hem with zipper
Construction
All aluminum frame construction
Warranty
1 Yeasr on Graphic
1 Year on Frame
Who This 5 ft x 32 in Circle Hanging Banner Suits Best
This size earns its place in a few specific scenarios. Exhibitors working a 10×10 booth frequently choose the 5 ft x 32 in circle hanging banner because the 5-foot diameter fills the airspace squarely over the booth without overlapping neighboring spaces, and the shorter 32-inch drop clears taller popup displays or tension fabric structures below it. That combination is harder to achieve with taller drop options.
The second natural fit is retail or hospitality environments — think a seasonal promotion at a grocery end-cap, a department-store sales event, or a hotel lobby directional sign. Ceiling heights in those spaces are often lower than a convention center, and the 32-inch drop keeps the bottom of the graphic well above pedestrian traffic without requiring a rigging crew. A 5ft circle ceiling banner at this drop height lands in the visual sweet spot between “too high to read” and “too low to walk under.”
Event producers staging corporate meetings, product launches, or award ceremonies also reach for this kit when they need a branded overhead element that installs quickly and stores compactly. The carrying bag makes transport manageable for a single person, and the hardware reassembles at the next venue without any new parts.
What the Kit Delivers
The 5ft circle hanging banner with hardware is a complete package. Here is what is inside:
- Dye-sublimation fabric graphic — Full-color print on wrinkle-resistant polyester; seams are finished so the circle holds its shape under tension
- Aluminum frame sections — Lightweight, interlocking segments that assemble into a rigid circular ring to support the graphic drum
- Rigging cable and swivel — Pre-measured steel cable with a swivel hook; attaches to venue rigging points without additional rigging hardware in most cases
- Compression carry bag — Fits the disassembled frame and rolled graphic for airline-checked-bag-friendly transport
- Double-sided option — Upgrade to a two-panel graphic for visibility from any aisle direction
For venue-specific rigging requirements, review the trade show hanging banner guide on Showfire Displays — it covers ceiling weight limits, rigging point spacing, and what questions to ask your show decorator in advance.
Setup, Reuse, and Graphic Replacement
The frame assembles in sections, snapping together into the circular ring shape before the fabric sleeve slides over it. Most exhibitors complete the full assembly in 20 to 25 minutes the first time, and faster on subsequent shows once the sequence is familiar. There are no tools, adhesives, or specialty clips involved.
For storage between events, the graphic should be rolled — not folded — to prevent permanent crease lines in the fabric. The aluminum sections nest compactly in the carry bag alongside the rolled graphic. Stored properly, the hardware is reusable indefinitely; if your branding changes before the hardware wears out, you can order a replacement graphic sleeve without repurchasing the frame, which keeps long-term costs reasonable.
Cleaning is straightforward: spot-clean the fabric with a damp cloth and mild detergent, then allow it to air-dry fully before packing. Avoid machine washing, which can distort the seam geometry and cause the sleeve to fit loosely on the frame.
If you are comparing this 32-inch drop against other available heights within the same diameter, the full circle hanging banner category page lists every combination so you can evaluate drop options side by side.
Choosing the Right Size for Your Venue
The 5-foot diameter is a strong mid-range choice, but it is worth confirming it against your actual booth or room dimensions before ordering. The table below maps the key decision factors:
| Scenario | Recommended Diameter |
|---|---|
| 10×10 trade show booth | 5 ft |
| 10×20 or larger trade show booth | 8 ft or 10 ft |
| Retail end-cap or low ceiling venue | 5 ft |
| Large open convention hall or arena | 10 ft |
If your space is a 10×20 layout or a high-ceiling exhibit hall where you need the sign readable from 50 feet away, the 8ft circle hanging banner scales up proportionally using the same hardware logic. For the largest footprint scenarios — a 20×20 booth or a wide-open arena floor — the 10ft circle ceiling banner delivers the diameter needed to anchor that scale of space. Both sibling sizes follow the same assembly process, so teams familiar with the 5-foot kit can transition to a larger size without relearning the rigging system.
For a broader orientation to overhead signage — including how to work with show decorators and plan rigging timelines — the hanging banner buying guide is a practical starting point before you finalize your order.
If you need a custom 5ft round hanging banner with your own artwork, the order process accepts print-ready files and provides templates to ensure your design fills the circle correctly without bleed or safe-zone errors.
Configure Your Kit and Get It in the Air
The 5 ft x 32 in circle hanging banner is ready to configure with your artwork today — choose single- or double-sided, submit your file, and get your brand overhead at the next show. Visit the product page, select your options, and place your order now.









