This particular model is 12ft in diameter and 60Â inches tall.
Graphic is included in price.
• (1) Collapsible extruded aluminum hanging sign frame (includes curved stabilizer, quarter circle, curved connector.)
• (1) Full color zippered tension fabric graphic print
• Nylon travel bag
• Hanging Cable
• Also includes: chain, spring, eye hook, large screw, hook loop lock, screw tightener
Graphic Material
Fabric
Graphic Finishing
Hem with zipper
Construction
All aluminum frame construction
Warranty
1 Year on Graphic
1 Year on Frame
From Unboxing to Hanging: How This Kit Goes Up
- Unpack and inventory. Lay out the frame sections, hub connectors, rigging cable, and carry bag. Every component ships labeled; cross-check against the included list before heading to the show floor.
- Assemble the circular frame. Connect the curved aluminum sections at the hub joints. No tools required — the connectors click and lock, and the finished frame holds a true 12-foot circle without warping.
- Attach the graphic. Slip the printed fabric panel over the frame using the integrated pocket system along the perimeter edge. Start at one hub, work around evenly, and tension the last section to remove any slack.
- Rig the cable. Thread the included steel rigging cable through the center attachment point and connect it to the venue’s motor or drop point using the provided hardware. Confirm the weight rating with your show decorator before hang day.
- Raise and level. Once attached to the rigging line, raise the banner slowly and check for level. Minor adjustments at the cable attachment point correct any tilt before the display locks into final position.
- Pack for reuse. After the show, reverse the steps: collapse the graphic, disassemble the frame into its sections, and return everything to the carry bag for next time.
What This 12 ft x 60 in Circle Hanging Banner Looks Like Up Close
The graphic substrate is a taut stretch fabric that reads like a backlit print even under standard trade show ambient lighting — colors stay saturated and blacks stay deep because the dye-sublimation process embeds ink into the fiber rather than sitting on top of it. Edge finishing on the fabric uses a sewn-in pole pocket around the full perimeter, which keeps the edge clean and the surface smooth once the banner is stretched onto the frame. For buyers planning multi-sided visibility, the 12ft circle hanging banner configuration page lets you choose between a single-sided print and a double sided 12ft circle hanging banner that puts your artwork on both faces of the panel — essential for cross-aisle reads.
| Specification | Detail |
|---|---|
| Diameter | 12 ft (144″) |
| Drop height | 60 in |
| Print method | Dye-sublimation on stretch fabric |
| Frame material | Lightweight aluminum alloy |
| Graphic sides | Single or double sided |
| Hardware included | Full rigging kit + carry bag |
The frame itself is finished in a neutral silver that disappears behind the graphic when the banner is hung at any distance beyond arm’s reach. Aluminum tubing keeps the total assembled weight well within standard venue rigging limits, though always confirm your specific venue’s load restriction with your decorator in advance.
Choosing the Right Size for Your Overhead Display Lineup
A 12-foot diameter is the largest footprint in the circle family, so it suits island booths, large in-line configurations, and anchor positions at the end of major aisles. For context on where this diameter sits in the broader product family, the circle hanging banner category page maps all available diameters and drop heights side by side, which makes it straightforward to confirm that this size matches your floor plan and ceiling clearance before you order.
If you manage multiple booth sizes across a show season, it helps to know the smaller siblings. The 8ft circle hanging banner works well for 10 x 10 and 10 x 20 spaces where a 12-foot circle would extend past the booth boundary, and the 5ft circle hanging sign is useful as a secondary identifier marker above a product zone or reception counter within the same large booth. Using a 12-footer as the primary overhead mark and a 5-footer as a secondary interior marker is a common approach for island booths that want to break up a large floor plan into navigable zones.
For a deeper look at how hanging banner diameter, drop height, and booth size interact — and how to communicate with your decorator about rigging requirements — the trade show hanging banner guide covers all of it in one place and is worth a read before you finalize your configuration.
Ready to Configure Your 12 ft x 60 in Circle Hanging Banner?
The custom 12ft circle hanging banner is built to order, so graphic choices, single- or double-sided printing, and any rush timeline questions are all handled at the configuration stage. Visit the 12ft circle hanging banner with hardware product page, select your options, upload your artwork, and place your order — production moves fast and your kit ships complete, ready to hang on show day.









