20’X10′ Tension Fabric Trade Show Display | Custom Graphics

Display Size: 233.25″W x 117.62″H x 12.37”D

Graphic Size:  257.25″W x 118″H

Graphic Material
Stretch Fabric
Dye-Sub Printing Process

Graphic Finishing
2” loop Velcro sewn around the perimeter

Package Includes

• 1 Stretch Fabric Graphic
• Aluminum Frame
• Black Nylon Carry Bag

Construction

• Aluminum Frame
• 2” Hook Velcro Strips
• Plastic Hooks

Package Includes

• (1) Aluminum Frame
• (1) Digital Print on Fabric w/ End Panels
• (1) Padded Nylon Bag

Optional

• Hard Carrying Case
• Lights

Production Time: 2 Business Days after Proof Approval

Warranty

• 1 Year on the Frame
• 1 Year on the Graphic

What the Endcap-Equipped RPL Frame and Fabric Deliver Together

The RPL (“Revolution Pop Lock”) frame uses a hub-and-strut system that clicks open in sections, locking automatically at each joint. At 20 feet wide and roughly 10 feet tall, the assembled structure creates a massive branded wall — yet each section collapses individually for transport. The endcap panels curve inward on both sides, giving the display a finished, three-dimensional profile that flat-edge backwalls cannot match.

Your stretch polyester graphic is printed with dye-sublimation ink, which bonds directly into the fabric fibers rather than sitting on top. The result is color that stays vivid through repeated use and machine washing. Because the graphic is a single zippered sleeve, there are no Velcro strips, magnetic bars, or panel alignment headaches — just pull it over the frame and zip it closed.

For a deeper look at how these systems compare to other backwall options, the fabric pop up display guide breaks down frame types, graphic methods, and sizing in detail.

Practical Scenarios for a 20′ x 10′ Endcap Backwall

This pop up backdrop display earns its place in specific booth layouts where sheer width and height matter. Here are the situations where it performs best:

• 20-foot inline booths. Convention halls commonly assign 20′ x 10′ spaces along an aisle wall. This backwall spans the full width, and the endcaps create natural side boundaries without requiring separate wing panels.
• Island booth perimeters. If your island footprint is 20′ x 20′, two of these displays placed back to back create a branded core visible from all four aisles.
• Corporate lobbies and conferences. Internal sales meetings, product launches, and shareholder events benefit from a large-format branded backdrop that sets up quickly and travels between venues.
• Multi-day expos. The machine-washable graphic and rigid aluminum frame hold up across week-long shows without sagging or fading — a common pain point with pop up display booths that rely on vinyl or laminated panels.

Because the entire assembly is tool-free, your marketing team or hired labor can handle installation without specialized exhibit contractors.

Choosing the Right Size for Your Booth Layout

Not every event calls for 20 feet of backwall. If your upcoming show assigns a smaller footprint, Showfire Displays carries the same RPL frame system in widths that scale down cleanly. A 10ft fabric pop up display with graphics fills a standard 10 x 10 booth, while a 15ft fabric pop up bridges the gap for mid-size spaces. Brands that exhibit at tabletop events or need a secondary accent wall can explore the 5ft fabric pop up display or the 8ft fabric pop up for compact setups.

Going bigger? The 30ft fabric pop up display creates a panoramic tension fabric trade show display wall for the largest exhibition spaces. You can browse all widths, compare configurations, and check pricing on the main fabric pop up displays category page.

Getting More Shows Out of Your Graphic and Frame

A booth pop up display this size represents a real investment, so protecting it between events pays off quickly. Remove the fabric graphic from the frame after each show and fold it loosely — tight creasing can stress the ink over time. Machine wash it on a gentle cycle with cold water and hang it to dry; avoid bleach and high heat. The aluminum frame should be wiped down with a damp cloth and stored in its carry cases to prevent scratches.

Replacing or updating the graphic is straightforward because the frame accepts any new pillowcase sleeve printed to the same dimensions. That means you can refresh messaging for seasonal campaigns, new product launches, or co-branded events without purchasing a second frame. Fabric pop up displays for trade shows offer this reprint flexibility as a core advantage over rigid panel systems.

If you are evaluating this tension fabric trade show display alongside other exhibit formats, the complete trade show displays buyer’s guide compares fabric backwalls to banner stands, modular exhibits, and custom builds side by side.

Secure This 20′ x 10′ RPL Endcap Graphic Package

This tension fabric trade show display package ships with the full RPL collapsible aluminum frame, the zippered dye-sublimation stretch polyester graphic (including both endcap panels), and protective carry cases. Add it to your cart today, upload your artwork, and let Showfire Displays handle the printing. Your pop up display booth ships ready to set up the moment it arrives — no contractors, no tools, no guesswork. Order now and own the biggest backwall in your next exhibit hall.