10ft x 10ft Fabric Pop Up Display with Endcaps

Display Size: 117.62”W x 117.62”H x 12.37”D

Template Size:  142.75”W x 118”

Graphic Material
Stretch Fabric

Graphic Finishing
2” loop Velcro perimeter

Construction

• Aluminum Frame
• 2” Hook Velcro Strips
• Plastic Hooks

Package Includes

• (1) Aluminum Frame
• (1) Digital Print on Fabric w/ End Panels
• (1) Padded Nylon Bag

Optional

• Hard Carrying Case
• Lights

Production Time: 2 Business Days after Proof Approval

Warranty

• 1 Year on the Frame
• 1 Year on the Graphic

The Gap That an Open-Sided Backwall Leaves Behind

Most exhibitors discover the problem only after their first show: a backwall without endcaps shows raw aluminum frame edges the moment a visitor walks by at an angle. The sides of the display become visible dead zones — no graphic, no branding, just hardware. In a busy exhibit hall where attendees approach booths from every direction, that exposed edge undercuts the polished look the rest of the booth is working to project. For a 10 x 10 pop up display positioned in a corner or at the end of an aisle, the issue compounds because two angles of approach both reveal the same bare framing.

Adding endcaps solves it structurally, not cosmetically. They are not decorative skirts — they are separate tensioned fabric panels that mount to the end columns of the frame and extend the printed graphic around the sides, producing a continuous visual wrap that holds from every viewing angle.

Features That Deliver a Finished, Professional Look

The frame at the core of this display is an interlocking aluminum bow-tie pop-up system, the same architecture behind every 10ft straight fabric pop up display in this line. The aluminum is lightweight enough for one person to carry but rigid enough to hold tension in the fabric without sagging over the course of a multi-day show.

The fabric graphic pillowcases over the frame and zips shut at the back, creating consistent tension across the full 10-foot span. Because the graphic is a single seamless panel, there are no seam lines to interrupt your design. When you need to freshen the brand — new campaign, new season, updated contact details — the frame stays in service and only the fabric graphic needs to be replaced, which is a considerably smaller investment than replacing the entire display.

Exhibitors shopping for a fabric pop up display for 10×10 booth spaces will find this format performs well in inline, peninsula, and end-cap booth configurations. The hard-shell case provides genuine travel protection for the frame and rolled fabric, and its counter function means you can stage product samples, literature, or a tablet at the front of the booth without ordering separate furniture.

Graphic Replacement Is Straightforward

The pillowcase attachment system means swapping the graphic requires no tools and no professional installation — the old fabric unzips, the new fabric slides on, and you are done in minutes. This matters practically when campaign creative changes annually.

The Case Is More Than Packaging

The wheeled hard-shell case converts to a display counter at booth level, which reclaims floor space you would otherwise spend on a separate furniture rental and gives you a clean branded surface at attendee height.

Size Sits at the Top of the Straight Pop-Up Range

At roughly 10′ wide x 8′ tall, this is among the largest single-unit fabric pop-up formats available. If you are weighing whether a 10 ft pop up display at this scale is right for your booth footprint, the complete fabric pop up display guide walks through size selection, graphic specs, and configuration trade-offs in detail.

How This Configuration Fits the Broader Lineup

The 10-foot straight endcap package sits at the wide end of the fabric pop-up range. Exhibitors who need a smaller footprint — a tabletop backdrop, a conference room display, or a lightweight option for smaller venues — will find the 5ft fabric pop up display covers that ground. For exhibitors who land between the two, the 8ft fabric pop up display fills a 10-foot wall with a slightly narrower graphic field, which some brands prefer for the visual breathing room it creates on either side.

The full range of fabric pop up displays at Showfire Displays covers multiple widths, straight and curved frame options, and package configurations from bare frame to fully accessorized, so there is a format for most booth types and budgets. If a 10 x 8 pop up display or a narrower width fits your space better, browsing the collection takes less than a minute.

Configure Your 10×10 Fabric Pop Up Display With Endcaps and Order

This 10×10 fabric pop up display with endcaps ships with everything needed to exhibit — frame, graphic, endcaps, and rolling case — so there are no surprise add-ons at checkout. Upload your artwork, confirm your graphic specifications against the template on the product page, and place your order. A 10 foot pop up display at this scale is a significant, reusable asset: the frame handles hundreds of setups, the fabric resists wrinkling, and replacement graphics keep the display current without replacing the hardware. Order yours today and have it ready for your next show date.