33.5 in. Silverwing Double-Sided Retractable Banner Stand – Vinyl Graphic Package

Construction:
The Silverwing is finished in anodized aluminum and heavy duty plastic end plates. It is quick and simple to use and holds 33.5″w x 69″ to 92″H banners (with a 6″ bottom bleed).

Set up: Banner attaches by tape on the bottom and by Clamp bar on the top.

Graphic Material: Super Flat Vinyl – UV printed

Base Size: 35″W x 3″H x 8.5″D

Includes:

• (2) Single-Sided 33.5″w x 69″h Graphic Print
• Double-Sided Retractable Base
• Top cross bar
• Adjustable support pole
• Silverwing travel bag (11.5″ x 40″ x 4″)

Setting Up Your 33 x 80 Retractable Banner From Unboxing to Live Display

One of the practical advantages of the Silverwing design is how few steps stand between the carry bag and a fully assembled display. Here is the sequence:

1. Remove the hardware from the carry case. The Silverwing ships fully pre-assembled with the base spring-loaded and ready. No tools, no loose hardware bags.
2. Extend the telescoping support pole. The adjustable center pole clicks to the correct height for an 80″ graphic. Adjust it to your venue’s ceiling clearance if needed.
3. Attach the graphic top bar. The banner’s top rail connects to the pole with a simple clip mechanism. Both graphic sides are already loaded onto the base cassette.
4. Pull the graphic up from the cassette. The spring-tension cassette feeds the graphic smoothly. Pull it to full height and secure it to the top rail on each side.
5. Level the feet and step back. The base feet angle out for stability on convention hall carpet, tile, or hardwood — no sandbag required in typical indoor conditions.

Breakdown reverses the sequence. The graphic retracts cleanly with light, controlled pressure, protecting the vinyl surface from creasing.

Print, Material, and Finish Details You Will Notice Immediately

The vinyl graphic included in this custom silverwing banner package is produced on a scuff-resistant, semi-gloss vinyl substrate optimized for retractable cassette systems. The print engine lays down UV-cured inks at production resolution, yielding color accuracy that holds from viewing distances of three feet or twenty. Because this is a 33.5 inch double sided retractable banner stand package, your supplier prints two complete graphic panels — each one spec’d to the cassette’s precise roll tolerance, so the leading edge feeds into the cassette slot cleanly every time.

Buyers occasionally search for a retractable banner 33×79 because some manufacturers list the graphic height as 79″ versus 80″ — a rounding difference in how visible display height is measured from base to top rail. This package prints to the full usable panel dimension specific to the Silverwing cassette, so your artwork fills the display area without unexpected cropping.

Artwork is submitted as a print-ready PDF or high-resolution raster file. The Showfire Displays team reviews incoming files for bleed, resolution, and color profile before production begins, which keeps costly reprints off the table. Both graphic sides can carry the same artwork or two entirely different designs — your choice at the time of order.

Choosing Between the Silverwing and Other Retractable Configurations

The Silverwing is a mid-to-premium product in a broad retractable banner category. If your budget is tighter and a single-sided display covers your needs, the econo roll banner stand is a leaner alternative worth comparing — it trades the dual-sided cassette for a lighter base and a lower entry price. On the other end of the spectrum, if you need a full wall of branded display rather than a single unit, the pull up banner stands collection covers configurations designed for side-by-side deployment across a large booth backdrop.

Before settling on this 33×80 retractable banner stand format, it is worth confirming two things: first, that 80″ display height clears your venue’s sight lines without bumping ceiling drops or signage restrictions; second, that double-sided display is actually visible from both approaches — this matters most in aisle-facing or island-booth setups where foot traffic circles the display. If you want a broader framework for making that call, the retractable banner stand buying guide covers hardware grades, graphic materials, and venue-specific sizing logic in one place. For a full look at everything the Silverwing line offers across heights and graphic options, the silverwing double sided banner hub page is the right starting point.

The 33.5 inch double sided retractable banner stand also pairs naturally with a matching single-sided Silverwing at a neighboring position — a common setup for exhibitors who want one face promoting a product and a flanking unit running event-specific messaging.

Ready to Put Your Brand on Both Sides

Ordering this package is straightforward: configure your design intent, submit your print-ready artwork files, and Showfire Displays handles the rest from production to shipping. The carry case means your display ships the same way it travels — protected, compact, and ready for the next event the moment it arrives. Browse the full range of retractable banner stands to compare widths and heights before you commit, or go ahead and order the 33.5 inch double sided retractable banner stand now and have a complete, two-faced display ready for your next show.