33 X 80 Retractable Banner – 33.5 in. Silverwing 80″h Fabric Graphic

Construction:
The Silverwing is finished in anodized aluminum and heavy duty plastic end plates. It is quick and simple to use and holds 33.5″w x 69″ to 92″H banners (with a 6″ bottom bleed).

Set up: Banner attaches by tape on the bottom and by Clamp bar on the top.

Graphic Material: Fabric (Recommended)

Base Size: 35″W x 3″H x 8.5″D

Includes:

• Stand
• Top cross bar
• Adjustable support pole
• Silverwing travel bag (11.5″ x 40″ x4″)

Printed Banner is not changable.

Dye-Sub Fabric Graphic — What You Actually Get

The fabric graphic included with this package is printed using a dye-sublimation process, which bonds ink directly into the polyester fibers rather than laying it on the surface. The result is a vivid, scratch-resistant print that resists fading under venue lighting. Unlike solvent-printed vinyl, dye-sub fabric is machine-washable on a gentle cycle and can be ironed on low heat to remove any fold lines from shipping.

A few practical specs worth noting:

The matte finish eliminates glare under overhead fluorescent or LED lighting, so your message reads clearly from every angle on the show floor. For a deeper dive into how retractable hardware and graphic options work together, the retractable banner stand guide covers everything from graphic substrates to pole mechanics.

Silverwing Aluminum Hardware — Built to Repeat

The Silverwing base is machined from lightweight aluminum with a wide, stable footprint that resists tipping on carpet or hard flooring. A padded top rail clamps the fabric graphic securely, and the telescoping support pole locks at any height between 69″ and 92″. That adjustability is a genuine advantage: buy a replacement graphic at a different height down the road, and the same hardware accommodates it without any new parts.

Setup is three steps — extend the pole, attach the top rail, and let the spring-loaded roller pull the graphic taut. Teardown reverses the process. The entire 33 x 80 retractable banner kit weighs roughly 8 lbs packed, which keeps shipping costs low and saves your back on event day.

The included padded nylon carry bag protects both the base and pole during transit. Toss it in a car trunk, check it as luggage, or stack it on a freight pallet alongside the rest of your trade show displays shipment.

Scenarios Where This 33 x 80 Retractable Banner Earns Its Keep

A 33 inch retractable banner stand fits almost anywhere a standard doorway exists, which makes it one of the most versatile display widths available. Here are situations where this particular Silverwing configuration shines:

• Trade show inline booths — Flank a table or position one on each side of a backdrop to frame your space. Two units side by side still occupy less than six feet of width.
• Retail entrances and point-of-purchase zones — Swap graphics seasonally to promote new products or limited-time offers.
• Corporate lobbies and conference rooms — A single unit beside a reception desk communicates brand identity to every visitor.
• Medical and dental offices — Promote services or health campaigns in waiting areas without permanent wall signage.
• Real estate open houses — Lightweight enough to move from property to property throughout a weekend.

If your event requires a wider footprint, the Silverstep retractable banner stand is available in widths up to 60 inches with similar adjustable-height hardware.

Picking the Right Model Inside the Showfire Lineup

The Silverwing sits in the mid-range tier — sturdy enough for frequent use, affordable enough for multi-unit orders. But Showfire carries models above and below this price point, so it helps to know where each fits.

If your budget is tight and you need a single-event or low-frequency display, the Econo Roll banner stand is a popular economy retractable banner stand that gets the job done at a lower cost. The OneChoice pullup banner stand offers another value-priced option with a slightly different base design. For exhibitors who want a deluxe retractable banner stand with a broader base and heavier-gauge aluminum, the Silverstep deluxe banner is worth a look.

Need the most compact footprint possible? A mini retractable banner stand — like a tabletop unit — works well on counters and registration desks where floor space is at a premium. And the Steppy banner stand delivers a rock-solid weighted base at a competitive price if stability on uneven surfaces is a priority.

Browse the full collection of retractable banner stands to compare widths, heights, and graphic options side by side.

Maximizing the Life of Your Silverwing Investment

A few simple habits will keep your 33 x 80 retractable banner looking fresh across dozens of deployments. Retract the graphic fully into the base whenever the unit is not on display — this protects the print surface from scuffs and dust. Store the unit upright in its carry bag in a climate-controlled space; extreme heat can weaken the spring tension over time.

When the fabric graphic needs cleaning, remove it from the hardware, wash on a gentle cycle with cold water, and hang to dry. A quick pass with a steamer or low-heat iron before an event eliminates any storage creases in seconds.

Grab Your Silverwing 33.5 in. Fabric Graphic Package

This 33 x 80 retractable banner package ships complete with the Silverwing base, telescoping pole, dye-sub fabric graphic, and padded carry bag — everything you need to present a polished display the day it arrives. Add it to your cart above to lock in pricing, or reach out to the Showfire Displays team with questions about custom artwork, bulk orders, or rush production. Your next event deserves a display that sets up fast, travels easy, and looks sharp under any lighting.