60 in. SilverStep Tabletop Retractable Banner Stand – Clamp Bar – Silver – 59″H Super Flat Graphic Package

Clamp Top Bar (Recommended)

Only covering about 3/8” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates

Hook and Loop Top Bar

Attached on the backside of the graphic, the hook and loop top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

60″w Tabletop Graphic Package Includes:

• (1) 59”h Single-Sided Vinyl Graphic (installed)
• (1) Silver Retractable Base with End Caps
• (2) Telescopic Support Pole*
• (1) Clamp Top Bar with End Caps
• (1) Silverstep Travel Bag

*We shorten pole height by cutting bungee cord and removing sections

Features

• Material: Super Flat Vinyl
• Print Process: UV Cured
• Warranty: Lifetime on hardware; one (1) year on graphics
• Stand Size: 61.5”W x 3”H x 9.5”D
• Shipping Dimensions: (1) box 6”L x 13”W x 67”H
• Shipping Weight: 28 lbs
• Artwork Size: 60”W x 59”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

Three Decisions That Shape How Well This Configuration Works for You

Does 59″ of graphic height fit your specific counter environment?

Tabletop retractable banners draw their height from the tabletop surface, not the floor. A 59″ rise from a standard 30″ counter puts the top of the graphic at roughly 89″ from the floor — high enough to clear most booth backdrops and visible from a distance. Before ordering, measure your actual counter height and confirm that 89″ of combined clearance will not conflict with low ceilings, overhead signage, or booth regulations at your venue.

Is super flat vinyl the right material for this application?

Super flat vinyl is a rigid-backed graphic substrate engineered to retract and extend without creasing, and it reproduces photographic imagery and fine gradients with sharp fidelity. It is the right choice for permanent or semi-permanent messaging that will not change event to event. If your messaging rotates frequently — seasonal promotions, rotating product lines — the vinyl can be replaced by releasing the clamp bar and loading a new graphic, but the substrate itself is not fabric. If you want to compare vinyl to fabric options before committing, the retractable banner stand buying guide covers the tradeoffs in detail.

Is your artwork file ready for a clamp bar installation?

The clamp bar design requires that your graphic file include a top bleed allowance — typically a half-inch to one inch — so that the bar grips printed material rather than bare vinyl edge. Supply your artwork at full print resolution (150 dpi minimum at final size, 300 dpi preferred) and confirm bleed settings with the Showfire production team before submitting. Sending a file without the correct bleed is the single most common cause of production delays on this item.

What the 60 x 59 Super Flat Vinyl Tabletop Retractable Banner Stand Gets Right at Full Width

Most 60 inch tabletop retractable banner stand configurations face the same challenge: maintaining graphic flatness and even tension across a wide substrate. The Silverstep base solves this with a spring-loaded retraction mechanism calibrated for the specific graphic weight of super flat vinyl at this width. The result is a graphic that rolls and unrolls smoothly without requiring force and that holds its flat profile under normal event conditions — fluorescent lighting, foot traffic vibration, and the occasional bump from a passing attendee.

The silver anodized base finish is worth noting beyond aesthetics. Anodized aluminum resists scratching and scuffing better than painted finishes, so the base continues to look clean after dozens of transport cycles in the included carry bag. For exhibitors who run a consistent booth program across many events annually, the durability gap between anodized and painted hardware compounds over time.

The 60 x 59 super flat vinyl tabletop retractable banner stand also benefits from the same clamp bar system used across the broader silverstep retractable banner stand line — meaning graphic replacement follows the same process whether you are swapping an image on this 60″ tabletop unit or on a full-height floor stand. Staff who have worked with Silverstep hardware before will not need a refresher.

How the 60″ Width Compares to Narrower Tabletop Configurations

The silverstep 60 tabletop banner stand is the right choice when you need a display that anchors an entire counter section rather than accenting one end of it. If your counter is shorter or you need a second stand for a side position, the 36 inch tabletop retractable banner stand offers the same Silverstep hardware quality at a width that suits narrower surfaces. For very compact footprints — a small checkout counter or a narrow reception desk — the silverstep tabletop 24 banner stand is worth evaluating as a space-efficient alternative.

The 60 x 59 super flat vinyl tabletop retractable banner stand is specifically designed for situations where width is an asset — wide hotel conference tables, pharmacy or clinic counters, and double-wide event registration setups where narrower displays would leave dead space on either side of the message.

Configure Yours and Have It Delivered Before the Next Event

The Showfire production team keeps turnaround times tight, and most complete packages ship within a few business days of artwork approval. To see all height configurations available for the 60″ base — including shorter graphic options if your counter environment has overhead constraints — browse the full 60 inch tabletop banner stand category before finalizing your selection. When you are ready, upload your artwork, confirm your bleed settings with the production team, and submit your order. The silverstep tabletop 60 retractable banner is designed to be event-ready fast — unbox it, extend the graphic, and your counter display is live in under two minutes.