Tabletop Retractable Banner Stand – 36 in. SilverStep(R) Tabletop –

Clamp Top Bar (Recommended)

Only covering about 3/8” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates

Hook and Loop Top Bar

Attached on the backside of the graphic, the hook and loop top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

36″w Tabletop Graphic Package Includes:

• (1) 59”h Single-Sided Vinyl Graphic (installed)
• (1) Silver Retractable Base with End Caps
• (1) Telescopic Support Pole*
• (1) Clamp Top Bar with End Caps
• (1) Silverstep Travel Bag

*We shorten pole height by cutting bungee cord and removing sections

Features

• Material: Super Flat Vinyl
• Print Process: UV Cured
• Warranty: Lifetime on hardware; one (1) year on graphics
• Stand Size: 37.5”W x 3”H x 9.5”D,
• Shipping Dimensions: (1) box 13”L x 5”W x 41”H
• Shipping Weight: 18 lbs
• Artwork Size: 36”W x 59”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

Silver Clamp Bar Hardware — Designed to Travel and Last

The clamp bar rail on this package is finished in a silver powder coat that resists scratches and fingerprints through repeated setup and teardown cycles. Unlike hook-and-loop or adhesive attachment methods, the clamp bar grips the full width of the graphic mechanically, distributing tension evenly so the panel hangs flat every time. The cassette housing shares the same silver finish, giving the entire unit a clean, coordinated look that disappears behind your branding rather than competing with it.

Because every component is aluminum, the overall weight stays low enough to toss in a carry bag alongside your laptop. That portability makes this silver step retractable banner stand a natural companion for sales reps who move between client offices, satellite showrooms, and regional conferences throughout the quarter. For a deeper look at how retractable hardware compares across styles and price points, browse the retractable banner stand guide.

What the Super Flat Graphic Material Delivers

The “Super Flat” designation refers to a rigid vinyl substrate that lies flat against the support pole rather than bowing or rippling. At close range–the typical viewing distance for anything sitting on a table–even minor warping becomes distracting. Super Flat vinyl eliminates that problem.

The graphic retracts into the cassette between uses, protecting the printed surface from dust, scuffs, and ambient light. Over dozens of events, this storage method keeps colors looking fresh far longer than an exposed foam-board print would.

Practical Settings for a Compact Retractable Pull Up Banner

Not every display opportunity calls for an eight-foot backdrop. A tabletop retractable banner stand thrives in tighter settings where you still need branded visibility:

• Trade show tabletops — Pair it with product samples or literature to anchor a smaller booth footprint. If you are planning a full exhibit, the complete trade show displays buyer’s guide walks you through combining tabletop units with larger hardware.
• Lobby and reception desks — Rotate seasonal promotions or highlight upcoming events right where visitors check in.
• Classroom and conference presentations — A retractable pull up banner beside a projector screen reinforces key data points without requiring a separate easel.
• Retail checkout counters — Promote loyalty programs, new arrivals, or limited-time offers exactly where purchasing decisions happen.

Because the base sits on the table surface, foot traffic cannot bump or topple it the way a floor stand sometimes gets nudged in a crowded aisle. That stability also makes it practical as an outdoor retractable banner stand for covered patios, farmers-market tables, or outdoor check-in stations where wind is minimal but space is tight.

Picking the Right Width and Model Across the SilverStep Family

The SilverStep line spans multiple widths and two form factors–full-height floor stands and tabletop units. Choosing between them comes down to where you display and how much graphic real estate you need. The parent collection page for the Silverstep retractable banner lays out every option side by side.

If 36 inches is wider than your surface allows, the silverstep tabletop 24 banner stand fits narrower counters while keeping the same Super Flat graphic technology. Need more width for a longer table? Step up to the silverstep tabletop 48 retractable banner or the 60 inch silverstep tabletop banner stand to cover more visual ground.

For events where you want floor-standing height instead, the same SilverStep engineering is available in the silverstep 36 inch banner stand as well as narrower and wider floor models like the 24-inch Silverstep banner stand, the silverstep 48 retractable banner stand, and the silverstep 60 roll up banner. Mixing a floor unit behind your table with this tabletop retractable banner stand on top of it creates a layered display that communicates at two sight lines simultaneously–a strategy often used by brands investing in a deluxe retractable banner stand setup for major shows.

Order This 36″ SilverStep Tabletop Super Flat Package

Every day this display sits in a warehouse instead of on your counter is a missed branding opportunity. Add the 36-inch SilverStep Tabletop Clamp Bar Silver Super Flat Graphic Package to your cart, upload your artwork, and let a tabletop retractable banner stand do the selling for you at your next event.