24 in. SilverStep Tabletop Retractable Banner Stand – Clamp Bar – Black – 45″H Fabric Graphic Package

Clamp Top Bar (Recommended)

Only covering about ?” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates.

Velcro Top Bar

Attached on the backside of the graphic, the velcro top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

24”w Tabletop Graphic Package Includes:

(1) 45”h Single-Sided Fabric Graphic (installed)

(1) Black Retractable Base with End Caps

(1) Telescopic Support Pole*

(1) Clamp Top Bar with End Caps

(1) Silverstep Travel Bag

*We shorten pole height by cutting bungee cord and removing sections.

Features

Material: Banner Fabric (Fab Ban)

Print Process: Full-Color Dye Sublimation

Warranty: Lifetime on hardware; one (1) year on graphics

Stand Size: 25.5”W x 3”H x 9.5”D

Shipping Dimensions: (1) box 6”L x 13”W x 29”H

Shipping Weight: 13 lbs

Artwork Size: 24”W x 45”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

Hardware, Graphic, and How They Work Together

The stand’s black aluminum base houses a spring-loaded cassette that stores the rolled graphic when the display is not in use. Deploying the display takes under a minute: pull the graphic upward from the base, insert the support pole into the base slot, and clip the pole tip under the clamp bar to hold the graphic at full height. When the event ends, release the pole, lower the graphic slowly, and the cassette retracts the print automatically. That retraction mechanism is what makes a 24 inch tabletop retractable banner so much faster to pack than a frame-mounted display.

The fabric graphic itself is printed on a soft polyester substrate that resists glare under fluorescent or LED lighting — a meaningful advantage over glossy vinyl in environments where ceiling lights shine directly onto a tabletop. The clamp bar spans the full 24-inch width, gripping the graphic’s top hem uniformly so there are no loose corners or sagging edges. When you need to swap in a new graphic for a different campaign or season, you simply release the clamp, slide the old print off, and load a fresh one without tools.

For buyers comparing substrates before committing, the retractable banner stand buying guide covers the practical differences between vinyl and fabric prints in detail, which can help you decide whether this configuration is the right match for your lighting conditions and reuse plans.

A Practical Scenario: Product Launch at a Retail Counter

Picture a specialty food brand setting up at a Saturday farmers market. The vendor arrives with a tote bag, a folding table, and a sample tray. Within the first few minutes of setup, the black 24 x 45 fabric tabletop retractable banner stand is up and displaying the brand’s logo, a hero product shot, and a short tagline — all in clean, vivid color that looks deliberate and polished rather than improvised. The 45-inch height clears most product displays without blocking the vendor’s view of the table, and the black base coordinates with the dark tablecloth without visual clutter.

At the end of the market, the graphic retracts into the base in seconds, the pole stores flat alongside the stand, and the whole package drops into the tote bag the vendor already had. No disassembly, no fumbling with frame pieces. That kind of friction-free transport is exactly why the silverstep tabletop 24 retractable banner format has become a go-to for small-format event displays. As a silverstep retractable banner stand, this model carries the same hardware quality and cassette reliability found across the full Silverstep line.

Buyer Questions Worth Answering Before You Order

Is 45 inches tall enough, or should I consider a taller configuration?

The 45-inch height is well suited to standard 6-foot folding tables where clearance above the table surface is limited. If your display surface is lower — a cafe counter, for example — the graphic will read even more prominently at 45 inches. If your setup calls for more vertical presence, the 36 inch tabletop retractable banner stand and silverstep tabletop 48 banner stand are sibling options that offer wider footprints for larger table configurations. Choose based on the horizontal space available on your table, not just the height.

Can I reuse the hardware with a different graphic later?

Yes. The clamp bar system is specifically designed for graphic replacement. Order a new fabric print cut to the same 24 x 45 dimensions, load it into the clamp bar, and the stand is ready for the next campaign. This is one of the reasons the 24 inch silverstep tabletop banner stand is popular with brands that refresh seasonal promotions without wanting to invest in new hardware each cycle.

Does the package ship with everything needed to display, or are separate accessories required?

Everything required for a complete display ships in this package: the black aluminum stand with built-in cassette, the tensioning pole, the clamp bar, and the custom-printed fabric graphic. No additional hardware, adhesives, or tools are needed. The stand arrives assembled at the cassette level and requires only the graphic load and pole insertion before it is ready for display.

Configure Your Graphic and Place Your Order

The black 24 x 45 fabric tabletop retractable banner stand is ready for your artwork. Upload your design file, confirm your graphic dimensions match the 24″ x 45″ print area, and add this package to your cart — the hardware and custom print ship together as one order. If you want to browse every graphic height available before deciding, the silverstep 24 tabletop banner stand page lists all options side by side. Order today and get a display that is ready to perform at your next event.