60 in. SilverStep Retractable Banner Stand – Clamp Bar – Silver – 80″H Super Flat Graphic Package

Clamp Top Bar (Recommended)

Only covering about ?” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates.

Velcro Top Bar

Attached on the backside of the graphic, the velcro top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

60”w Graphic Package Includes:

(1) 80”h Single-Sided Vinyl Graphic (installed)

(1) Silver Retractable Base with End Caps

(2) Telescopic Support Poles

(1) Clamp Top Bar with End Caps

(1) Silverstep Travel Bag

Features

Material: Super Flat Vinyl

Print Process: UV Cured

Warranty: Lifetime on hardware; one (1) year on graphics

Stand Size: 61.5”W x 3”H x 9.5”D

Shipping Dimensions: (1) box 6”L x 13”W x 67”H

Shipping Weight: 39 lbs

Artwork Size: 60”W x 80”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

What Comes With This Package — Hardware, Graphic, and Print Format

The SilverStep base is a fully enclosed aluminum cartridge with a spring-loaded retract mechanism — rugged enough for repeated trade show cycles, compact enough to travel without special handling. When the show is done, the graphic retracts into the base, and the whole unit slips into the included padded carrying case. The silver anodized finish is a neutral that reads as polished without competing with your brand colors.

The clamp bar is the structural centerpiece of this configuration. It spans the full 60-inch width of the graphic, clamping the top edge with even tension that resists the curl and wave common to wide-format stands. At 80 inches tall, the graphic occupies substantial vertical space — tall enough to read from across an aisle, short enough to clear most venue ceiling restrictions.

Super Flat vinyl is printed digitally and engineered to lay flat without adhesive borders or visible seams. The surface accepts photographic-quality output: deep blacks, vivid color, and fine line detail all reproduce cleanly. Provide your print-ready artwork at the correct dimensions and the file goes straight to press — no redesign fees for correctly formatted submissions.

For a broader look at how the silverstep retractable banner stand line is structured — including tabletop models, double-sided hardware, and alternative finishes — the parent collection covers every available configuration.

How This Stand Performs in a Real Exhibit Setting

Picture a regional healthcare conference at a mid-size convention center. Your company has a ten-foot inline booth — one six-foot table, a literature rack, and two display positions flanking the back wall. The 60 silverstep retractable banner stand goes up in the primary left position: extend the support pole, attach the clamp bar, pull the graphic to height, and the display is ready. Setup from case to fully extended takes under three minutes, without tools.

Because the clamp bar holds tension across the full 60-inch span, the graphic reads as a single flat plane — not a series of shallow curves that fragment the artwork. The silver hardware is visible only at the base and along the top bar, so the graphic itself carries the visual weight. At the end of the two-day event, the banner retracts, the pole sections nest into the case, and the whole unit loads without drama.

That repeatability is what separates a well-built cartridge stand from cheaper alternatives. If you want to understand the full spectrum of materials, mechanisms, and price points before placing an order, the retractable banner stand buying guide covers the decision framework in detail.

Common Questions From Buyers of This Configuration

Is 80 inches tall the right height for an average trade show booth?

For most inline and island booths, yes. The 80-inch height on this 60 x 80 super flat vinyl retractable banner stand positions the top of the graphic at roughly eye level plus overhead — readable from distance without brushing most standard eight-foot drape lines. If your venue has lower restrictions or you need the graphic to sit under a canopy, review the other heights available in the silverstep 60 banner stand family before ordering.

Can the graphic be replaced without buying new hardware?

Yes. The clamp bar design allows the vinyl graphic to be swapped independently of the base. Order a replacement graphic when your messaging changes and the same hardware handles the next campaign.

What if I need a wider footprint covered by a second, smaller unit?

Some exhibitors pair this primary stand with a compact secondary display for a counter or literature table. The silverstep tabletop 60 is a tabletop-height retractable at the same 60-inch width, purpose-built for that scenario. For tighter spaces where full width is not needed, the silverstep 24 banner stand offers a narrow-footprint alternative that travels even lighter.

Ready to Order This Configuration?

The 60 x 80 super flat vinyl retractable banner stand with clamp bar is a workhorse format that earns its place at every show it attends — wide enough to anchor a booth wall, flat enough to do justice to high-resolution artwork, and durable enough to retire only when your message changes, not because the hardware gave out. Upload your artwork, confirm your dimensions, and place your order today. If you have questions about file setup or lead times, the Showfire Displays team is available to help before you commit. Do not let your next event arrive without the display it deserves.