60 in. SilverStep Retractable Banner Stand – Clamp Bar – Silver – 72″H Super Flat Graphic Package

Clamp Top Bar (Recommended)

Only covering about ?” of the top of the graphic, the clamp bar is our most trusted option for long-term use and perfect for hotter climates.

Velcro Top Bar

Attached on the backside of the graphic, the velcro top bar provides a clean look as it doesn’t cover any part of the artwork and works best in cooler climates.

60”w Graphic Package Includes:

(1) 72”h Single-Sided Vinyl Graphic (installed)

(1) Silver Retractable Base with End Caps

(2) Telescopic Support Poles

(1) Clamp Top Bar with End Caps

(1) Silverstep Travel Bag

Features

Material: Super Flat Vinyl

Print Process: UV Cured

Warranty: Lifetime on hardware; one (1) year on graphics

Stand Size: 61.5”W x 3”H x 9.5”D

Shipping Dimensions: (1) box 6”L x 13”W x 67”H

Shipping Weight: 39 lbs

Artwork Size: 60”W x 72”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

Three Questions to Work Through Before Placing This Order

Does 72 Inches of Display Height Fit Your Venue?

Not every venue is created equal. Hotel ballrooms with dropped ceilings, retail floors with overhead fixtures, and airport corridors with structural beams can all impose height restrictions that make a 72-inch graphic a smarter pick than the 80-inch or 92-inch alternatives in this line. Measure from floor to the lowest obstruction at your specific display location before committing to any height, and confirm whether the event organizer has posted a maximum stand height in the exhibitor guidelines.

Is Super Flat Vinyl the Right Print Substrate for This Environment?

Super flat vinyl is the workhorse substrate for trade show and event displays: it holds color saturation well under mixed artificial lighting, it tolerates repeated retraction and extension without creasing at the edges, and it can be wiped clean between events. If your graphic has dense photographic imagery or gradient backgrounds, the super flat vinyl surface reproduces those tones with noticeably less banding than standard glossy vinyl. Consult our retractable banner stand buying guide for a detailed breakdown of how substrate choice affects color rendering and long-term durability across different event environments.

Is Your Artwork Print-Ready at the Correct Dimensions?

The graphic in this package is produced from customer-supplied artwork. Files should be sized to the finished graphic dimensions — 60 inches wide by 72 inches tall — at a minimum of 100 dpi at full size, with bleed added per the template provided at checkout. RGB color mode is accepted; Showfire’s production team will confirm any critical settings before the file goes to press. Submitting a correctly sized, high-resolution file is the single fastest path to an on-time ship date, so resolve any artwork questions before placing the order rather than after.

What the 60 x 72 Super Flat Vinyl Retractable Banner Stand Does Differently at This Configuration

Most 60-inch wide stands in the market ship with a standard pole-top graphic attachment — a thin rod that presses into grommets or pockets sewn along the top edge of the print. The result is acceptable at lower heights, but at 60 inches wide the unsupported top edge tends to bow inward slightly, creating a subtle arc that is visible in photography and in person under direct lighting. The clamp bar system on this stand eliminates that problem entirely. A rigid aluminum clamp bar spans the full 60-inch width and applies even downward pressure along the entire top edge of the graphic, so the surface remains genuinely flat from left edge to right edge at any viewing angle.

That distinction matters most for graphics that carry text close to the top of the panel, brand marks that must read at a precise horizontal level, or any design where a curved top edge would misalign with adjacent display elements in a larger booth setup. The silverstep retractable banner stand line is engineered specifically for this kind of professional finish, and the clamp bar configuration represents its most tension-consistent option across all widths.

The 72-inch height also makes this configuration compatible with standard 8-foot pipe-and-drape booth setups when positioned in front of the drape rather than against it. A 60 x 72 super flat vinyl retractable banner stand sits comfortably below most drape headers, leaving the company signage on the drape visible above the graphic rather than obscuring it — a detail that matters when booth real estate is shared between branding layers.

For exhibitors who need a secondary display unit at a smaller scale, the silverstep 24 inch banner stand is worth reviewing as a companion piece for literature tables or registration counters. And if you want a similar wide-format presence on a tabletop surface rather than the floor, the silverstep 60 tabletop banner stand brings the same 60-inch span down to a compact countertop profile.

The silverstep 60 retractable banner stand is also designed so that replacement graphics can be ordered separately when the hardware remains in good condition — a practical consideration for any organization running the same stand through multiple campaigns or seasonal messaging rotations.

Ready to Configure Your Graphic?

The 60 x 72 super flat vinyl retractable banner stand is available to order now with your custom-printed graphic included. Upload your artwork, confirm your dimensions against the provided template, and Showfire’s production team handles the rest. This silverstep 60 pull up banner ships with the silver aluminum hardware, the clamp bar assembly, and a carry bag — everything you need to deploy a polished wide-format display at your next event. Place your order at Showfire Displays and get your graphic into production today.