36 in. SilverStep Retractable Banner Stand – Silver – 69″H Vinyl Graphic Package

36”w Graphic Package Includes:

• (1) 69”h Single-Sided Fabric Graphic (installed)
• (1) Silver Retractable Base with End Caps
• (1) Telescopic Support Pole
• (1) Clamp Top Bar with End Caps
• (1) Silverstep Travel Bag
Features

Warranty: Lifetime on hardware; one (1) year on graphics

Stand Size: 37.5”W x 3”H x 9.5”D

Shipping Dimensions:(1) box 13”L x 5”W x 41”H

Shipping Weight: 19 lbs

Material: Super Flat Vinyl

Template Size:36”W x 69”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

Why Buyers Choose the 36 x 69 Format Over Taller Alternatives

Not every venue has ceiling clearance to spare, and not every brand message needs six-and-a-half feet of graphic to communicate effectively. The silverstep 36 banner stand at 69 inches is deliberately sized for environments where a taller unit would feel top-heavy — hotel conference rooms with low drop ceilings, retail endcaps with fixed shelving above, and outdoor tented events where gusts become a liability with taller panels. The footprint stays tight, which matters enormously when booth real estate is measured in square feet.

If you coordinate displays for a franchise system or multi-location retail brand, the silverstep 36 inch retractable banner stand format also ships and stores with unusual efficiency. Multiple units can travel in a single vehicle without special rigging, and swapping graphics between locations takes minutes rather than hours.

This Package Is a Strong Fit When…

You need a display that travels weekly. Sales teams, regional brand managers, and event staff who move between venues every few days need hardware that absorbs repeated use. The SilverStep cassette mechanism uses a controlled retraction system that pulls the graphic evenly — no bunching, no creasing — so the print surface stays clean show after show.

Your venue limits display height. A 36 x 69 vinyl retractable banner stand works in spaces where an 80- or 92-inch unit would press against a ceiling tile, collide with a pendant fixture, or simply look out of scale. The 69-inch graphic height is the right call when you are working with a human-scale environment rather than a convention hall.

You are building a coordinated multi-unit display. Pairing two or three silverstep 36 units creates a horizontal triptych that reads as a single cohesive backdrop — an approach that consistently outperforms one large format display in environments where light and viewing angles vary. The silver hardware finish ties units together visually without the need for a custom color match.

What the Package Includes

The stand hardware is drawn from the full silverstep retractable banner stand lineup, which means replacement graphics, accessory poles, and hardware components are sourced from the same system — no hunting down compatible parts from a different manufacturer when it comes time to refresh your artwork.

Setting Up, Caring For, and Reusing This Display

Pull the graphic from the cassette with a steady, even draw, attach the support pole, and secure the top clamp bar — the whole process runs under two minutes once you have done it once. The vinyl print surface is durable enough to tolerate being rolled in and out repeatedly, but a few habits will extend its life significantly.

Keep the cassette horizontal when fully retracted during transport rather than storing it upright in a vehicle corner where it can absorb lateral stress. Before rolling the graphic back in, give it a brief visual check — if the surface has picked up fingerprints near the edges, a dry microfiber cloth removes most marks without chemicals that could degrade the print coating. Avoid storing the unit in vehicles during extreme heat; the vinyl can develop a curl memory that, while temporary, can cause uneven retraction until the graphic acclimates.

When your artwork needs a refresh, the graphic replaces independently — the hardware stays in service. This is one of the qualities highlighted in the retractable banner stand buying guide as a key reason the SilverStep system earns a favorable cost-per-use comparison against cheaper single-use alternatives.

If your display program includes smaller formats as well, the silverstep 24 inch retractable banner stand pairs cleanly with this configuration for counter-height or flanking applications, while the silverstep tabletop 36 banner stand is worth considering for seated environments where a floor-standing unit would obscure sightlines across the room.

A Note on Graphic Files and Print Specs

The silverstep 36 pull up banner graphic is printed at high resolution on premium vinyl stock. Supply your artwork at 36″ x 69″ at 150 dpi with at least 0.5 inches of bleed on all sides — this prevents any white edge from appearing when the graphic seats in the cassette channel. RGB color mode is standard; if your brand colors are defined in Pantone, request a proof before approving your final file. Bright backgrounds and high-contrast typography print particularly well on the vinyl surface and remain legible across the viewing distances typical of a trade show floor or retail entrance.

Put This Display to Work

Order your 36 x 69 vinyl retractable banner stand today and have a complete, professional display ready for your next event — hardware, printed graphic, and carry bag included, shipped and ready to deploy. Upload your artwork, confirm your file specs, and your display moves from cart to booth floor faster than you might expect.