36”w Graphic Package Includes:
• (1) 84”h Single-Sided Fabric Graphic (installed)
• (1) Silver Retractable Base with End Caps
• (1) Telescopic Support Pole
• (1) Clamp Top Bar with End Caps
• (1) Silverstep Travel Bag
Features
Warranty: Lifetime on hardware; one (1) year on graphics
Stand Size: 37.5”W x 3”H x 9.5”D
Shipping Dimensions:(1) box 13”L x 5”W x 41”H
Shipping Weight: 19 lbs
Material: Fabric
Template Size:36”W x 84”H (we will add a 6” bleed at the bottom)
Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.
Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.
From Bag to Booth — Setting Up Your Display
One of the practical advantages of this package is how little effort the setup actually demands. Here is the sequence from unboxing to a fully assembled stand:
- Unzip the carry bag and lay out the components. You will find the base unit with the graphic cartridge already wound inside, the telescoping support pole, the silver clamp bar, and the carry bag itself.
- Extend the telescoping pole to your desired height. The pole adjusts to match the 84-inch graphic height; twist-lock the sections once positioned.
- Pull the fabric graphic upward from the base cartridge. The graphic unrolls smoothly — hold it at the top edge and draw it up in one controlled motion.
- Seat the graphic’s top edge into the silver clamp bar. The bar grips the fabric firmly across the full 36-inch width, keeping the face taut and wrinkle-free throughout the event.
- Attach the pole to the base and lean it into the clamp bar slot. The pole clicks into position at a slight rear angle, providing a stable tension that keeps the display upright on its own.
- Confirm the base feet are fully extended. Swing both feet outward until they lock flat — the stand is ready.
Breakdown follows the same steps in reverse, and the graphic retracts into the base with gentle, even downward pressure. Pack time is typically under 90 seconds.
What the Fabric Graphic Delivers Up Close
The print surface on this package is where the 36 x 84 fabric retractable banner stand genuinely separates itself from vinyl alternatives. Graphics are produced using dye-sublimation — a heat-transfer process that bonds pigment directly into the polyester fibers rather than sitting on top of the material. The result is a matte, glare-free finish that photographs well under booth lighting and does not produce the reflective hot spots that routinely wash out vinyl in photos and video.
Color accuracy on dye-sub fabric is noticeably richer than on calendar-vinyl prints at typical viewing distances. Gradients blend smoothly, photographic backgrounds hold their midtone detail, and sharp text edges stay crisp at sizes as small as 18-point. Because the pigment is in the fiber rather than on it, the graphic can be rolled and unrolled dozens of times without visible cracking, peeling, or color fade. For exhibitors who show frequently, that durability directly reduces the long-term cost per event.
| Feature | Fabric Graphic | Standard Vinyl |
|---|---|---|
| Print method | Dye-sublimation | UV inkjet |
| Finish | Matte, glare-free | Glossy or semi-gloss |
| Wrinkle resistance | High | Moderate |
| Repeat-use durability | Excellent | Good |
| Photography / video | No hot spots | Reflective |
The silver clamp bar does more than hold the graphic — its brushed finish ties the hardware tone to silver-accented booth furniture, giving the whole setup a cohesive look without any extra effort.
Pairing This Stand With Other Displays in the Lineup
A single 36-inch stand works well as a standalone focal point, but many exhibitors use it as one component in a coordinated booth layout. The full silverstep banner stand family includes multiple widths and heights, so mixing and matching units at consistent graphic heights creates a visual flow that guides attendees through your space naturally.
If your setup includes a product table or registration counter, the silverstep tabletop 36 banner stand uses the same 36-inch width in a shorter tabletop format — useful for keeping messaging at eye level for seated visitors without competing with your floor unit visually. For tighter corridor locations or narrower inline booths, the silverstep 24 pull up banner steps down to a 24-inch width while maintaining the same hardware quality and fabric print options.
Mixing the 36 x 84 fabric retractable banner stand with a tabletop unit on a counter and a narrower floor stand on the aisle edge gives a three-point coverage layout that works well in a 10-foot inline booth without feeling cluttered.
Order Your SilverStep 36″ x 84″ Package
The silverstep 36 banner stand is available to order directly through Showfire Displays, and the package ships with everything listed above — no separate graphic orders, no hardware add-ons required. Submit print-ready artwork in the format specified at checkout, and the team will confirm dimensions and color profile before production begins.
For buyers who want to compare this height against other configurations in the same width, the full 36 silverstep retractable banner stand options page lists every available height and finish combination side by side. The 36 x 84 fabric retractable banner stand ships with free standard shipping — add it to your cart and get your next event display on the way.









