36 in. SilverStep Retractable Banner Stand – Clamp Bar – Black – 92″H Super Flat Graphic Package

36”w Graphic Package Includes:

• (1) 92”h Single-Sided Vinyl Graphic (installed)
• (1) Black Retractable Base with End Caps
• (1) Telescopic Support Pole
• (1) Clamp Top Bar with End Caps
• (1) Silverstep Travel Bag
Features

Warranty: Lifetime on hardware; one (1) year on graphics

Stand Size: 37.5”W x 3”H x 9.5”D

Shipping Dimensions:(1) box 13”L x 5”W x 41”H

Shipping Weight: 19 lbs

Material: Super Flat Vinyl

Template Size: 36”W x 92”H (we will add a 6” bleed at the bottom)

Suggested Uses: Retail Stores, Malls, Kiosks, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Etc.

Hardware Setup: Place the base on the ground, assemble telescopic pole, pull out graphics and affix to pole. Stickers on base and pole help guide banner set up.

The Problem This Configuration Solves

Picture a busy trade show floor: rows of 80-inch displays, all competing at the same eye level, all blending into a single visual band that attendees stop noticing after the first aisle. The height deficit is not a design problem — it is a hardware problem. A display that tops out below shoulder height on a tall attendee leaves the upper third of the room completely empty. Signage placed at a standard 80-inch height can also be obscured by booth furniture, neighboring banners, and foot traffic. The answer is a display that rises above the noise — literally — while still fitting inside checked luggage and setting up without tools.

What This Package Delivers — Hardware, Graphic, and Tensioning System

The silverstep 36 inch retractable banner stand ships as a complete graphic package, meaning the hardware and the printed vinyl arrive together, ready to deploy.

The clamp bar is the feature that separates this package from economy pull-up displays. Rather than relying on a graphic that tucks into a channel and hopes friction keeps it flat, the clamp bar grips the full width of the vinyl at the top and applies even, consistent tension downward. The result is a surface that is genuinely flat — not “flat enough” — which matters when your graphic includes straight lines, gradients, or a logo with tight registration requirements. The black 36 x 92 super flat vinyl retractable banner stand pairs that tensioning advantage with a base wide enough to resist tipping even in higher-traffic areas.

The silverstep 36 inch banner stand mechanism is engineered to handle repeated retraction cycles without the spring losing tension prematurely. If you deploy this stand weekly across a regional tour schedule, you will not be replacing it after a single season.

Artwork File Requirements

Supply your print-ready file at 100 dpi at full size (36 in. x 92 in.) or 300 dpi at one-third scale. CMYK color mode is preferred. Include bleed according to the template provided at checkout.

Graphic Replacement

The clamp bar design means swapping a graphic later is straightforward — unclamp the old print, feed in the new one, and reclamp. You are not locked into one message forever, which makes the hardware investment pay off across multiple campaigns.

Carry and Storage

The padded bag holds the rolled graphic and collapsed pole together. Total packed weight is light enough to gate-check as a carry-on for most domestic flights, and the bag’s shoulder strap keeps both hands free at the airport or convention center.

When to Choose 92 Inches Over a Shorter Height

For exhibitors who use this as a room divider or a backdrop anchor rather than a freestanding single display, the 92-inch height fills vertical space in a way that shorter configurations simply cannot. Convention centers with 10-foot ceiling minimums give you comfortable clearance. Hotel ballrooms typically work well too. If you are planning a setup in a tighter environment — a retail pop-up inside a smaller boutique or a low-ceiling hallway kiosk — the broader silverstep retractable banner stand lineup includes shorter height options worth reviewing before you commit.

A custom silverstep 36 banner stand at 92 inches also pairs naturally with a matching tabletop unit when you want to layer a display. The 36 inch tabletop banner stand uses the same 36-inch width and visual language, so the two can work together as a cohesive system without requiring a custom design rebuild.

If your program also covers narrower spaces or secondary kiosk positions, the silverstep 24 inch retractable banner stand is worth a look — it shares the same hardware platform and super flat vinyl print options in a slimmer footprint.

Before finalizing your substrate choice, the retractable banner stand buying guide covers how super flat vinyl compares to polyester fabric in detail, including durability, glare characteristics, and ideal use cases by environment.

Your Next Step

The black 36 x 92 super flat vinyl retractable banner stand is ready to order with your custom artwork. Configure your package, upload your file, and the silverstep 36 roll up banner ships as a complete, display-ready unit. Every silverstep 36 banner stand order includes the stand, graphic, pole, and carry bag — nothing extra to source. Order today and have your display ready before your next event.